How to Remove and Replace Polaris Vac-Sweep Sweep Hose Complete

Hello and welcome, in today's blog, I will be going over how to remove and replace the Polaris Vac-Sweep sweep hose complete. I will also be going over about the product and have added a picture so you know exactly what you are looking for. At the very bottom of this blog, there will be a YouTube video our pool professional has made to show you exactly how to do this quick fix and to give you some tips and tricks. Keep on reading to learn more! 

About The Product 

The sweep hose complete (B5) is a replacement part made by Polaris for these model cleaners. It is also made from the same high-grade material used for the original factory part. Making this a trusted OEM product. This sweep hose was designed to be a complete set of the sweep hose assembly, with all the parts you would need including the Tail sweep Pro. This hose assembly was built to run off the back of the cleaner and shoot high-pressure water that agitates the dirt and debris off the surface of your pool. This way the cleaner can make its way around to sucking it up into the zippered all-purpose bag. A great troubleshooting tip to extend the life of this part is to replace the scrubber and wear rings. The reason for this is that way the other parts that come with this assembly can be counted on for a longer duration of time.

How To Remove And Replace 

The sweep hose is located on the main feed mast and you are looking for the hose clamp. Before you get saturated you will need a small flat-head screwdriver. You are going to put the screwdriver in between where the teeth grab each other and try to push and lift the clamp to separate the teeth. Once you remove the hose clamp, you will wiggle the hose back and forth until it comes right off. To install the hose back on, you will simply push it back on. What you are aiming for is matching the hose up to the indented part on the actual feed mast. Now you can put the hose clamp back on. It is best to put a new hose clamp on so it can keep your hose in place and will not break quicker from the chemical decomposition. 

In this video, our pool professional walks you through how to remove and replace the Sweep Hose Complete (B5) for the Polaris Vac-Sweep 180 pressure side pool cleaner. This sweep hose complete was designed to be a complete set of the sweep hose assembly, with all the parts you would need including the tail sweep pro. This hose assembly was built to run off the back of the cleaner and shoot high-pressure water that agitates the dirt and debris off the surface of your pool. This way the cleaner can make its way around to sucking it up into the zippered all-purpose bag. A great troubleshooting tip to extend the life of this part is to replace the scrubber and wear rings. The reason for this is that way the other parts that come with this assembly can be counted on for a longer duration of time. If you have any questions or need help please contact us and we can help you to the best of our ability.